Solar power generation is divided into photothermal power generation and photovoltaic power generation. Regardless of production and sales, development speed and development prospects, solar thermal power generation cannot catch up with photovoltaic power generation. It is possible that due to the widespread popularity of photovoltaic power generation, there is less contact with CSP. Generally spe...

After two years of the impact of the epidemic, Intersolar Europe opened again this year. It can be clearly felt that the number of participants is larger than in previous years, and the European market is hot with inquiries. From this year to the first half of next year, the first-line vertically integrated manufacturers are basically full of orders. Some small terminal manufacturers have reported...

1. Asia Pacific: China, India and Australia are the main incremental markets China: Newly installed capacity expected to reach 85GW in 2022 India: Renewable energy targets push to 16GW by 2022 Australia: "Green Hydrogen" + Energy Storage Drives the Growth of Photovoltaic Installations 2. Europe: policy support + target increase, the demand for photovoltaic installed capacity in 2022 will reach 49....

Six Advantages of Bluesun Shingled Modules 1.Higher Load Through the dynamic and static load test at -40℃, Bluesun Solar panels are more compressive!Additional added value for power plant applications in areas with high dynamic loads. 2.Super Withstand Voltage Test Bluesun modules pass -40°C compared to conventional half-pieces.Dynamic and static load test, more compressive 3.Tightened Hail Tests ...

As the traditional PERCP-type monocrystalline cells in photovoltaic cells are already approaching the ceiling of their efficiency, HJT cells are competing with TOPcon cells for the next-generation mainstream technology route. PERC The process flow of PERC battery is relatively simple and the equipment is mature, and the cost is the lowest. The PERC technology is mainly based on the deposition of t...

Problem 1: Hot spots appear on components The main causes of hot spots are: component quality problems (excessive internal resistance), cracks and partial surface shadows. Hot spots can seriously damage photovoltaic solar modules or systems, and even cause fire accidents, but it is difficult to find them by visual inspection alone, so it is best to use an infrared thermal imager to check. Problem ...

The photovoltaic connector is a transportation hub that effectively connects the key components of the solar power generation system. It can be called the main artery of the solar power generation system. The connection with the junction box, components, solar inverters, etc. requires the use of photovoltaic connectors. According to the "Review and Analysis of Factors Affecting Photovoltaic Power ...

Introduction to Solar Inverters Solar inverters are often referred to as "inverters" for short, which can help the conversion system to invert the direct current generated by the solar power generation system, convert the direct current into alternating current and store it in the storage device to meet the user's electricity demand. . The principle of solar inverter Solar inverters can mainly per...